Steelco Washers

Steelco Washers epitomizes the essence of ergonomy, safety, productivity, automation, high throughput, usability, reliability, traceability, allergen protection, operator safety, quality design, energy-saving capabilities.

We offer a wide range of Steelco Washers instrument washer disinfectors. Professional washing and disinfection to improve the hygiene standard.

You can rely on our helpful Regional Representative Support Team to help navigate your options.

A fast cycle washer-disinfector can save over 54.000 liters of water in a year of average use. It is worth it!

Save Time

Big capacity pre-heating tanks directly connected through large valves, into the washing chamber, grant effective results in reducing cycle time.

Save Water

The water recirculation tank grants the recycling of the disinfection water into the next washing cycle with the reduction of energy and water consumption.

Save Energy

Cycle time reduction and thermal insulation.

1, 2, or 3 Tank Configurations Applied to a 5 Phases Fast Cycle

Steelco fast cycle machines tank configuration can vary in numbers, function, and heating temperatures to best suit customer procedures. The images above show examples of a 5 phase fast cycle configuration. Temperatures are referred to as preheating tanks, higher temperatures up to 93°C/199°F are then reached by sump heating.

The preheated 85 °C / 185 °F demineralized water tank allows to radically reduce thermodisinfection process time and consequently total cycle time. Pre-heated demineralized water flows directly with the shortest possible connection to the washing chamber without pump activity and minimizing heat loss.

The pre heated 65 °C / 149 °F hot water washing tank allows to reduce washing process time and consequently total cycle time.

The same tank is then used to pre heat the rinsing water while the machine is performing the washing phase.
Saving heating time avoids washing chamber to cool down thus reducing energy loss.

The pre heated 85 °C / 185 °F demineralized water tank allows to radically reduce
thermodisinfection process time and consequently total cycle time. Pre heated demineralized water flows directly with the shortest possible connection to the washing chamber without pump activity and minimizing heat loss.

The needed amount of pre wash cold water flows from the first tank directly to the washing chamber rapidly and without any pump activity.

The pre heated 65 °C / 149 °F hot water washing tank cuts down “in chamber” water heating time allowing to reduce washing process time and consequently total cycle time.

The same tank is then used to pre heat the rinsing water while the machine is performing the washing phase. Saving heating time avoids washing chamber to cool down thus reducing energy loss. Following customer procedures, pre heated rinsing water can be recycled from the previous cycle thermodisinfection water thus adding a significant energy, water and time saving.

The pre heated 85 °C / 185 °F demineralized water tank allows to radically reduce thermodisinfection process time and consequently total cycle time. Pre heated demineralized water flows directly with the shortest possible connection to the washing chamber without pump activity and minimizing heat loss.