Zoll R Series Defibrillator

Description

Zoll R Series Defibrillator Features

The Zoll R Series defibrillator features simple, smart, and ready defibrillation to hospitals.

The Zoll defibrillator R Series offers easy-to-use technology that will deliver high-quality CPR. With its different models, this defibrillator makes code-readiness possible for every hospital department with advances, cost-effective solutions for resuscitation.

• Always Code-Ready
• Remote viewing and administration from PC or mobile device
• History of readiness logs for the Joint Commission
• Readiness check includes defib, pacing, and ECG modules; AC power; battery; 30-joule shock test; electrodes attached and not expired
• Customizable dashboard

Zoll R Series Defibrillator Specifications

Dimensions and Weight

• Width: 8.2” (20.8 cm)
• Height: 10.5” (26.7 cm)
• Depth: 12.5” (31.7 cm)
• Weight: 15.2 lbs (6.9 kg)

Power

• Voltage: 100-120 V AC
• Frequency: 50/60 Hz
• Battery: Rechargeable Lithium-Ion battery pack

Waveform

• Rectilinear Biphasic
• Patient Impedance Range: 15 to 300 ohms
• Energy Selections: 1 to 10, 15, 20, 30, 50, 75, 100, 120, 150, and 200 joules selected using controls on front of the defibrillator or sternum paddles. (Note: When using appropriate pediatric resuscitation electrodes, the 75-joule setting is replaced by 70- and 85-joule settings.)

Smart Step Energy Levels

• Automatically escalates energy through a configured adult or pediatric protocol

Charge Time

• Less than 7 seconds with a new, fully charged battery (first 15 charges to 200 joules); longer charge times may result in a depleted or older battery.

Synchronized Mode

• Synchronizes defibrillator pulse to patient’s R wave. “SYNC” message displayed on monitor and markers shown on both monitor and recorded ECG

Charge Controls

• Control from the front of the defibrillator or apex paddle

Paddles

• External apex/sternum paddles; adult plates slide off to expose pediatric electrode surface

Code Readiness Testing (OneStep)

• Verifies defibrillator hardware, therapy delivery cable (with both paddles and electrodes), electrode condition and expiration (with select OneStep electrodes) without the need for a separate test fixture.

ECG Monitoring

• Patient Connection: 3-lead ECG cable, 5-lead ECG cable, paddles, or hands-free electrodes; selectable by the front panel switch
• Input Protection: Fully defibrillator protected. Circuits designed to prevent distortion of ECG signal by pacer pulse
• Implanted Pacemaker Spike Display: Circuits designed to detect most implanted pacemaker spikes and display a marker on the ECG trace
• Bandwidth: 0.5 to 21 Hz (-3dB) standard; 0.05 to 150 Hz diagnostic with configurable options of 0.5 Hz to 40 Hz or 1 Hz to 21 Hz
• Lead Selection: I, II, III aVR, aVL, aVF, V, P1, P2, P3 with OneStep Pacing electrode
• ECG Size: 0.5, 1.0, 1.5, 2.0 or 3.0 cm/mV display on monitor
• Heart Rate Display: 0 to 300 bpm ±5%
• Heart Rate Alarm: User selectable for tachycardia at 60 to 280 bpm; for bradycardia at 20 to 100 bpm. On/Off status displayed on the screen.

Display

• Screen Type: Color, VGA liquid crystal display (LCD)
• Screen Size: 6.5 inches (16.5 cm) diagonally
• Sweep Speed: 25 mm/sec
• Viewing Time: 5 seconds with the standard display format
• Channels: 3
• Information: Heart Rate, Leads/Pads, Alarm On/Off, Selected Energy, Delivered Energy, User Prompts and Warnings, Code Readiness Test Results, SpO₂, NIBP, EtCO₂, Pacer Functions, Code Markers, CPR Dashboard

Battery Packs

• Type:10.8 V (nominal) rechargeable lithium ion
• Capacity: 5.8 amp hours
• Weight: 1.7 lb (0.77 kg)
• Recharge Time: 5 hours or less with integral charger
• Operating Time: >4 hours of continuous ECG monitoring; 100 maximal energy (200 joules) discharges; 3.5 hours of continuous ECG monitoring and pacing at 60 mA, 80 ppm

Recorder

• Technology: 90 mm thermal array; 80 mm grid width
• Speed: 25 mm/sec, 6-second delay
• Printing Modes: Manual or automatic
• Annotations: Time, date, defibrillation energy, patient impedance, heart rate, pacer output, QRS synchronization marker, ECG size, ECG lead, alarm, defibrillator test results, analyze ECG, ECG bandwidth

External Pacing

• Type: VVI demand; asynchronous (fixed rate) when used without ECG leads or in asynchronous (ASYNC) pacing mode
• Pulse: Rectilinear, constant current: 40 ms ±2 ms; variable 0 to 140 mA ±5% or 5 mA, whichever is greater. The rate is variable from 30 to 180 ppm ±1.5%
• Output Protection: Fully defibrillator protected and isolated
• OneStep Pacing: Eliminates the need to connect separate ECG leads when used in conjunction with OneStep Pacing and OneStep Complete electrodes.

Pulse Oximetry with Masimo SET Technology

• Saturation Range: 1-100% (%SpO2 ) with a resolution of 1%
• Pulse Rate Range: 25-240 ppm with a resolution of 1 ppm
• Saturation Accuracy: Non-motion conditions ±2% for adults/pediatrics; ±3% for neonates. During motion ±3% for all patients
• Pulse Rate Accuracy: Non-motion conditions ±3 ppm. During motion ±5 ppm

Mainstream CO₂ Capnostat 5 Sensor

• Principle of Operation: Nondispersive infrared (NDIR) single-beam optics, dual-wavelength, no moving parts
• Warm-up Time: Full specifications within 2 minutes at an ambient temperature of 25°C. Capnogram in 20 seconds
• Environmental: Operating Temperature: 0°C to 45°C, Storage and Shipping Temperature: -40°C to 70°C

Sidestream CO₂ LoFlo Sensor

• Principle of Operation: Nondispersive infrared (NDIR) single-beam optics, dual-wavelength, no moving parts
• Warm-Up Time: Full specifications within 2 minutes at an ambient temperature of 25ºC. Capnogram in 20 seconds
• Environmental: Operating Temperature: 0°C to 40°C, Storage and Shipping Temperature: -40°C to 70°C.

NIBP

• Patient Population: Adult, Pediatric
• Method: Oscillometric
• Control: Automatic and manual measurement

WiFi Capable

• WiFi 802.11 a/b/g/n Ambicom-specific 1100C-CF Card P/N 8005-000101-01 compatibility
• Typical Readiness File: 750K
• Typical Code Data File: 1.2 MB