Axia TRIA Touch Screen Patient Monitor

Description

Axia TRIA Touch Screen Patient Monitor Features

• Touch screen
• Simple interface
• Intuitive
• Long life Lithium Battery
• Mobile (Backup battery powered)
• Portable (weight 1.71 lbs)
• Color waveforms
• Neonatal, pediatric and adult patient applications

Axia TRIA Touch Screen Patient Monitor Specifications

Axia TRIA Touch Screen Patient Monitor Dimensions & Weight:

• 8 x 4.5 x 4 (HxWxD inches)
• 2.5 LBS

DISPLAY

• Display: 5.0 inch (Diagonal) color TFT
• Resolution: 800 × 3(RGB) × 480
• Trace: 2 waveforms
• Waveforms: PLETH, ETCO₂
• Indicator: Alarm Indicator, Power Indicator, Pulse Beep and Alarm Sound
• Trend time: From 1 to 72 hours

LCD

• Display Type: TFT color LCD
• Size (diagonal): 5.0 inch
• Active Area: 152.4 (W) × 91.44 (H) mm
• Color arrangement: RGB-stripe
• Dot pitch: 0.0635(W) × 0.1905(H) mm
• Display Mode: Normally white, Transmissive
• Interface: Digital (TTL)
• Surface: Treatment: Anti-Glare

TOUCHSCREEN

• Type: Four-Wire Analog Resistive Touch Panel
• Input Mode: Stylus Pen or Finger
• Connector: FPC
• Insulation resistance: 25MΩ
• Voltage: 7VDC
• Chattering: 10ms
• Transparency: 80%
• Surface hardness: 3H
• Durability-surface scratching: Write 100,000
• Active force: 80gf
• Knock Test: 1,000,000 times

PERFORMANCE

SPO₂

• ASpO₂: Anti-motion SpO₂
• SpO₂% Range: 0 ~ 100%
• SpO₂ Accuracy: ±2% (70 ~ 100%,non-motion) ±3% (70 ~ 100%, motion)
• Pulse Rate Range: 30-250 bpm
• Pulse Rate Accuracy: ±2 bpm(non-motion), ±3 bpm (motion)
• Alarm Upper-lower Limit: Upper limit 70 ~ 100%, Lower limit 70 ~ 100%
• SpO₂ Probe:
  • Red light LED wavelength: 660nm±5nm
  • Infrared light LED wavelength: 940nm±10nm
• Standards: Meets performance of EN ISO 9919:2015

NIBP

• Measuring Technology: Automatic oscillating measurement
• Cuff Inflating: <30s (0 ~ 300 mmH, standard adult cuff)
• Measuring Period: AVE<40s
• Mode: Manual, Auto, STAT in AUTO Mode: 2 min ~ 4 hrs
• Pulse Rate Range: 30 bpm ~ 250 bpm
• Measuring Range:
  • Adult/Pediatric Mode
    • SYS: 40 ~ 250 (mmHg)
    • DIA: 15 ~ 200 (mmHg)
  • Neonatal Mode
    • SYS: 40 ~ 135 (mmHg)
    • DIA: 15 ~ 100 (mmHg)
• Resolution: 1mmHg
• Pressure Accuracy: Maximum Mean error: ±5mmHg
• Deviation: 8mmHg
• Overpressure Protection:
  • Adult Mode: 280(mmHg)
  • Neonatal Mode: 150 (mmHg)
• Alarm Limit:
  • SYS: 50 ~ 240 mmHg
  • DIA: 15 ~ 180 mmHg
• Standards: Meets performance standards ANSI/AAMI SP10:2002

RAPID TEMPERATURE (OPTION)

• Measurement Range: 30°C to 43°C (86°F to 109°F)
• Typical Measurement Times (after insertion into measurement site):
  • Oral (Quick Mode): 3-5 seconds (non-fever temps), 8-10 seconds (fever temps)
  • Oral (Standard Mode): 6-10 seconds
  • Axillary Mode: 8-12 seconds
  • Rectal Mode: 10-14 seconds
  • Direct Mode (All Sites): 60-120 seconds
• Pulse Timer: 60 Second count with a “beep” at 15 seconds, 2 “beeps” at 30 seconds, 1 “beep” at 45 seconds, and 2 “beeps”at 60 seconds
• Patient Accuracy: A Standard Prediction Mode reading and a Direct Mode reading will differ by less than ±0.2°C (±0.4°F) on 98% of tested patients
• Batteries: Four “AA” Required, Standard IEC package size. Alkaline –1.5 Volt, Approx. 6000 temperature readings
• Standards: Meets performance standards of EN 12470-3:2000 and ASTM E1112:2006

ETCO₂ (OPTION)

• Mode of Sampling: Sidestream or Mainstream
• Principle of Operation: Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts.
• CO₂ measurement Range: 0 to 150 mmHg (0 to 19.7%, 0 to 20 kPa)
• CO₂ Calculation Method: BTPS (Body Temperature Pressure Saturated)
• CO₂ Resolution: 0.1mmHg (0-69mmHg), 0.25mmHg (70-150mmHg)
• CO₂ Accuracy:
  • 0 ~ 40 mmHg ± 2 mmHg
  • 41 ~ 70 mmHg ± 5% of reading
  • 71 ~ 100 mmHg ± 8% of reading
  • 101 ~ 150 mmHg ± 10% of reading
  • Above 80 breath per minute ± 12%of reading
• Sampling rate: 100Hz
• Respiration Rate: 2 ~ 150 bpm
• Respiration Rate accuracy: ±1 breath
• Response Time: <3 seconds -includes transport time and rise time
• Measurement Range: 3 ~ 50 mmHg
• Standards: Meets performance standards of ISO/ FDIS 21647:2004 (E)

NETWORKING

• Wired Networking:
  • Industry standard: 802.11b/g wired network
  • Frequency Range: 2.412 ~ 2.484 GHz
  • Connected bedside number: Up to 16 bedside monitors
• Wireless Networking: Up to 100m indoors Industry standard 802.11b/g wireless Supports TCP/IP and UDP/IP Protocols

POWER

• Source: External AC power or internal battery
• AC Power: 100 ~ 240VAC, 50/60Hz, 150VA
• Battery: Built-in and lithium-Ion rechargeable, 12.6V/5Ah
• Charge Time: 8 hours
• Operating Time: 3 hours
• FUSE: 3.15A/250V

SAFETY

• Meet the requirement of EN60601 series, CE marking according to MDD93/42/EEC
• Type of Protection: Class I (on AC power) , internally powered equipment (on battery power): Per I.E.C. 60601-1, clause 2.2.4
• Degree of Protection: Type BF, defibrillator-proof CF – Applied part
• Sterilization or Disinfection methods: 70% isopropyl alcohol solution or a non staining disinfectant. Equipment not suitable for use in the with air or with oxygen or nitrous oxide
• Operation Mode: Continuous
• Protection Against Ingress of Liquids: IPXO